UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4371
                        
                            Issued:1987-04-30
                    
                            Revised:2012-03-27
                    
                            Style
                            4371
                        
                            Laminated Extruded Flat Ribbon Cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor30 AWG - 16 AWG solid or stranded, bare, tinned or coated.
		
			InsulationExtruded XLPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyTwo through 100 conductors, parallel construction.
		
			ShieldMetal faced PETP film or conductive thermoplastic (PVC). Conductive PVC shield, if used, may form a web between insulated conductors under the jacket. Both metal faced PETP film and extruded conductive PVC shield may be used in the same cable.
		
			BraidOptional.
		
			JacketFRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Two laminated sheets. See facing page for compound designation.

			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4371	Issued:1987-04-30
			Revised:2012-03-27


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	30 AWG - 16 AWG solid or stranded, bare, tinned or coated.

Insulation	Extruded XLPE, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Two through 100 conductors, parallel construction.

Shield	Metal faced PETP film or conductive thermoplastic (PVC). Conductive PVC shield, if used, may form a web between insulated conductors under the jacket. Both metal faced PETP film and extruded conductive PVC shield may be used in the same cable.

Braid	Optional.

Jacket	FRPVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point. Two laminated sheets. See facing page for compound designation.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.