UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4372
                        
                            Issued:1987-08-17
                    
                            Revised:2012-04-02
                    
                            Style
                            4372
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacke
                    
			Rating105 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C.
		
			Conductor24 AWG - 4/0 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded EP, Same as for Type SO Cord.
		
			AWG Conductor SizeMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			24-163027
		
			14-104540
		
			8-26054
		
			1-4/08072
		
			AssemblySame as type SO Cord.
		
			ShieldOptional
		
			JacketExtruded EPDM - Same as for type SO Cord except
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 inches or less4536
		
			0.426-0.7006048
		
			0.701-1.5008064
		
			1.501-2.50011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4372	Issued:1987-08-17
			Revised:2012-04-02


Rating	105 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C.

Conductor	24 AWG - 4/0 AWG solid or stranded round, tinned or bare.

Insulation	Extruded EP, Same as for Type SO Cord.
	AWG Conductor Size	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	24-16	30	27
	14-10	45	40
	8-2	60	54
	1-4/0	80	72

Assembly	Same as type SO Cord.

Shield	Optional

Jacket	Extruded EPDM - Same as for type SO Cord except
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 inches or less	45	36
	0.426-0.700	60	48
	0.701-1.500	80	64
	1.501-2.500	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or external interconnection.