UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4374
                        
                            Issued:1987-11-05
                    
                            Revised:2012-05-15
                    
                            Style
                            4374
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating105 deg C, 30 Vac, Cable flame.
		
			Conductor40 AWG minimum. Material not specified.
		
			InsulationExtruded PE, 2 mils minimum average thickness, 2 mils minimum thickness at any point.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional - PVC, 5 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.424 inch or less30 mils27 mils
		
			0.425 - 0.700 inch60 mils48 mils
		
			0.701 - 1.500 inches80 mils64 mils
		
			1.501 - 2.500 inches110 mils88 mils
		
			2.501 inches and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4374	Issued:1987-11-05
			Revised:2012-05-15


Rating	105 deg C, 30 Vac, Cable flame.

Conductor	40 AWG minimum. Material not specified.

Insulation	Extruded PE, 2 mils minimum average thickness, 2 mils minimum thickness at any point.

Assembly	Two or more twisted singles or groups of twisted singles twisted together may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional - PVC, 5 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.424 inch or less	30 mils	27 mils
	0.425 - 0.700 inch	60 mils	48 mils
	0.701 - 1.500 inches	80 mils	64 mils
	1.501 - 2.500 inches	110 mils	88 mils
	2.501 inches and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring in Class 2 circuits of electronic equipment where each end is terminated in connectors.