UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4375
                        
                            Issued:1987-11-05
                    
                            Revised:2019-11-07
                    
                            Style
                            4375
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating80 deg C, 150 Vac, Horizontal flame, Cable Flame.
		
			Conductor32 AWG - 16 AWG material not specified.
		
			InsulationExtruded XLPE, 10 mils min average, 9 mils minimum at any point.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together may belaid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldMay be over one or more of the insulated conductors or applied over the assembly.
		
			CoveringExtruded PVC, 5 mils minimum at any point.
		
			BraidOptional.
		
			JacketExtruded PVC
		
			dia of cable under jacket
		
			0.424 inches or less30 mils min average27 mils minimum at any point
		
			0.425-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			1.501-2.500 dia110 avg88 min
		
			2.501 dia and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment where each end is terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4375	Issued:1987-11-05
			Revised:2019-11-07


Rating	80 deg C, 150 Vac, Horizontal flame, Cable Flame.

Conductor	32 AWG - 16 AWG material not specified.

Insulation	Extruded XLPE, 10 mils min average, 9 mils minimum at any point.

Assembly	Two or more twisted singles or groups of twisted singles twisted together may belaid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	May be over one or more of the insulated conductors or applied over the assembly.

Covering	Extruded PVC, 5 mils minimum at any point.

Braid	Optional.

Jacket	Extruded PVC
	dia of cable under jacket
	0.424 inches or less	30 mils min average	27 mils minimum at any point
	0.425-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min
	1.501-2.500 dia	110 avg	88 min
	2.501 dia and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment where each end is terminated in connectors.