UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4379
                        
                            Issued:1987-11-05
                    
                            Revised:2012-04-23
                    
                            Style
                            4379
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			Conductor32 AWG - 16 AWG.
		
			InsulationExtruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together may be laid parallel to form flat, oval, or round cables. Lay not specified.  Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional - Extruded PVC, 5 mils minimum thickness at any point.
		
			ShieldOptional - May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.424 inch. or less30 mils27 mils
		
			0.425-0.700 inch60 mils48 mils
		
			0.701-1.500 inch.80 mils64 mils
		
			1.501-2.500 inch.110 mils88 mils
		
			2.501 inch. or larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring in electronic equipment where each end is terminated in connectors.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4379	Issued:1987-11-05
			Revised:2012-04-23


Rating	80 deg C, 600 Vac, Cable flame.

Conductor	32 AWG - 16 AWG.

Insulation	Extruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two or more twisted singles or groups of twisted singles twisted together may be laid parallel to form flat, oval, or round cables. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional - Extruded PVC, 5 mils minimum thickness at any point.

Shield	Optional - May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.424 inch. or less	30 mils	27 mils
	0.425-0.700 inch	60 mils	48 mils
	0.701-1.500 inch.	80 mils	64 mils
	1.501-2.500 inch.	110 mils	88 mils
	2.501 inch. or larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring in electronic equipment where each end is terminated in connectors.