UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4383
                        
                            Issued:1987-12-14
                    
                            Revised:2012-04-09
                    
                            Style
                            4383
                        
                            Multiple-conductor cable using extruded non-integral jacket.
                    
			Rating60 deg C, 300 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded SR - SILICONE - See facing page for compound
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseAs internal wiring or external interconnection in Class 2 circuits of electronics equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4383	Issued:1987-12-14
			Revised:2012-04-09


Rating	60 deg C, 300 Vac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded SR - SILICONE - See facing page for compound
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	As internal wiring or external interconnection in Class 2 circuits of electronics equipment.