UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4388
                        
                            Issued:1988-10-31
                    
                            Revised:2012-07-20
                    
                            Style
                            4388
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating90, 105 deg C, 300 Vac.
		
			ConductorTwo No. 16-18 AWG bare stranded (No. 36-34 AWG strands) copper and one No. 20-24 AWG bare, stranded (No. 36 AWG strands) copper. The two No. 16-18 AWG conductors shall be parallel and the No. 20-24 AWG conductor shall be located between the No. 16-18 AWG conductors.
		
			InsulationIntegral with Jacket. SRB/NR, 30 mils min average, 27 mils minimum at any point.
		
			AssemblyThe two 16-18 AWG conductors shall be parallel and the 20-24 AWG conductor shall be located between the 16-18 AWG conductors. Same as for Type SP-1 except that a 3 mil min at any point covering of insulating grade thermoplastic or or thermoset compound may be applied directly over the 22 or 24 AWG copper conductor. See Facing Page for Compounds.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4388	Issued:1988-10-31
			Revised:2012-07-20


Rating	90, 105 deg C, 300 Vac.

Conductor	Two No. 16-18 AWG bare stranded (No. 36-34 AWG strands) copper and one No. 20-24 AWG bare, stranded (No. 36 AWG strands) copper. The two No. 16-18 AWG conductors shall be parallel and the No. 20-24 AWG conductor shall be located between the No. 16-18 AWG conductors.

Insulation	Integral with Jacket. SRB/NR, 30 mils min average, 27 mils minimum at any point.

Assembly	The two 16-18 AWG conductors shall be parallel and the 20-24 AWG conductor shall be located between the 16-18 AWG conductors. Same as for Type SP-1 except that a 3 mil min at any point covering of insulating grade thermoplastic or or thermoset compound may be applied directly over the 22 or 24 AWG copper conductor. See Facing Page for Compounds.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special purpose cord to be used only as a power-supply cord for appliances employing an attachment plug with a water detection circuit.