UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4391
                        
                            Issued:1989-02-21
                    
                            Revised:2011-11-25
                    
                            Style
                            4391
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating125 deg C, 300 Vac, Horizontal flame.
		
			Conductor14 AWG - 10 AWG consisting of 30 AWG or smaller stranded, tinned or bare copper.
		
			InsulationIntegral with Jacket. EP, nominal 80 mils wall of EPDM and the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in. See Facing Page for Compound Identification.
		
			AssemblyTwo, three or four conductors, same as type SP Cord.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure; and for use in internal wiring of remote outdoor condensing units for domestic cooling systems. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4391	Issued:1989-02-21
			Revised:2011-11-25


Rating	125 deg C, 300 Vac, Horizontal flame.

Conductor	14 AWG - 10 AWG consisting of 30 AWG or smaller stranded, tinned or bare copper.

Insulation	Integral with Jacket. EP, nominal 80 mils wall of EPDM and the following (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.109 in., Wall after rip: 0.043 in. See Facing Page for Compound Identification.

Assembly	Two, three or four conductors, same as type SP Cord.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of room cooler units where ripped not more than 3 in. unless installed in a separate metal enclosure; and for use in internal wiring of remote outdoor condensing units for domestic cooling systems. Polarity identification may be omitted.