UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4392
                        
                            Issued:1989-04-20
                    
                            Revised:2012-01-11
                    
                            Style
                            4392
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			Conductor18-10 AWG or smaller stranded, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringA 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			BraidOptional.
		
			JacketNR - NEOPRENE, If the diameter of cable under the jacket is 0.700 or less, 45 mils min average, 36 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4392	Issued:1989-04-20
			Revised:2012-01-11


Rating	90 deg C, 300 Vac, Cable flame.

Conductor	18-10 AWG or smaller stranded, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Braid	Optional.

Jacket	NR - NEOPRENE, If the diameter of cable under the jacket is 0.700 or less, 45 mils min average, 36 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment.