UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4398
                        
                            Issued:1989-11-16
                    
                            Revised:2019-11-07
                    
                            Style
                            4398
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating125 deg C, voltage not specified, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional - The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering
		
			JacketXLPO
		
			dia of cable under jacket
		
			0.700 inches or less15 mils minimum average12 mils minimum at any point
		
			0.701-1.000 dia30 avg24 min
		
			1.000-1.500 dia45 avg36 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4398	Issued:1989-11-16
			Revised:2019-11-07


Rating	125 deg C, voltage not specified, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional - The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering

Jacket	XLPO
	dia of cable under jacket
	0.700 inches or less	15 mils minimum average	12 mils minimum at any point
	0.701-1.000 dia	30 avg	24 min
	1.000-1.500 dia	45 avg	36 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of appliances or electronic equipment.