UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4400
                        
                            Issued:1989-11-16
                    
                            Revised:2012-02-22
                    
                            Style
                            4400
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating60 deg C, Voltage not specified, Horizontal flame.
		
			Conductor30 AWG - 14 AWG solid or stranded round
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional - Applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			JacketExtruded XLPO
		
			Diameter of cable under jacketAverage thicknessMinimum thickness at any point
		
			0.700 inch or less15 mils13 mils
		
			0.701-1.000 inch30 mils24 mils
		
			1.000-1.500 inch45 mils36 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4400	Issued:1989-11-16
			Revised:2012-02-22


Rating	60 deg C, Voltage not specified, Horizontal flame.

Conductor	30 AWG - 14 AWG solid or stranded round

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional - Applied as a wrap or braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Jacket	Extruded XLPO
	Diameter of cable under jacket	Average thickness	Minimum thickness at any point
	0.700 inch or less	15 mils	13 mils
	0.701-1.000 inch	30 mils	24 mils
	1.000-1.500 inch	45 mils	36 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring