UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4401
                        
                            Issued:1989-11-16
                    
                            Revised:2012-04-02
                    
                            Style
                            4401
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating60 deg C, 300 Vac, Cable flame.
		
			Conductor30-14 AWG solid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldApplied as a wrap or metallic braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.
		
			JacketExtruded XLPO
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 or less3024
		
			0.426-0.7004536
		
			0.701-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4401	Issued:1989-11-16
			Revised:2012-04-02


Rating	60 deg C, 300 Vac, Cable flame.

Conductor	30-14 AWG solid or stranded round, tinned or bare.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Applied as a wrap or metallic braid or a wrap of aluminum faced polyester tape. An uninsulated drain wire may be used. The shield may be over one or more of the insulated conductors or applied between the conductor assembly and the optional covering.

Jacket	Extruded XLPO
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 or less	30	24
	0.426-0.700	45	36
	0.701-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of appliances or electronic equipment.