UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4402
                        
                            Issued:1991-02-25
                    
                            Revised:2012-04-02
                    
                            Style
                            4402
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C.
		
			Conductor18 AWG - 10 AWG smaller stranded, tinned or bare.
		
			InsulationExtruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo to four conductors, same as type SO Cord.
		
			JacketSee Facing Page for Compound Identification
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0-0.5004536
		
			0.501-0.7506048
		
			0.751-1.0008064
		
			1.001-1.50011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial use power supply cords used in appliances such as Commercial Cooking Appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4402	Issued:1991-02-25
			Revised:2012-04-02


Rating	90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C.

Conductor	18 AWG - 10 AWG smaller stranded, tinned or bare.

Insulation	Extruded CP or CPE or EP or NBR/PVC or NR - NEOPRENE or SRB/NR or XL, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two to four conductors, same as type SO Cord.

Jacket	See Facing Page for Compound Identification
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0-0.500	45	36
	0.501-0.750	60	48
	0.751-1.000	80	64
	1.001-1.500	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special use power supply cords used in appliances such as Commercial Cooking Appliances.