UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4403
                        
                            Issued:1991-03-12
                    
                            Revised:2012-05-15
                    
                            Style
                            4403
                        
                            Multi-conductor Cable with Extruded Non-Integral Jacket.
                    
			Rating150 deg C, 300 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure.  Style 3068, 18 or 16 AWG only.
		
			AssemblyThe cable consists of two insulated singles and optional insulated or uninsulated ground lead laid parallel. Twisted Kevlar, Aramid or polyester strength member laid parallel.
		
			CoveringOptional - Extruded SR, 6 mils minimum thickness at any point.
		
			JacketExtruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			BraidOptional - Polyester.  Over jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSupply leads for fixtures where not subject to mechanical abuse, and where the acceptability of the combination is determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4403	Issued:1991-03-12
			Revised:2012-05-15


Rating	150 deg C, 300 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure. Style 3068, 18 or 16 AWG only.

Assembly	The cable consists of two insulated singles and optional insulated or uninsulated ground lead laid parallel. Twisted Kevlar, Aramid or polyester strength member laid parallel.

Covering	Optional - Extruded SR, 6 mils minimum thickness at any point.

Jacket	Extruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Braid	Optional - Polyester. Over jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Supply leads for fixtures where not subject to mechanical abuse, and where the acceptability of the combination is determined by Underwriters Laboratories Inc.