UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4418
                        
                            Issued:1992-08-04
                    
                            Revised:2019-11-08
                    
                            Style
                            4418
                        
                            Multiple Conductor Cable with Extruded Insulation with an Extruded Non-integral Jacket.
                    
			Rating200 deg C, 600 Vac.
		
			Conductor18 AWG - 8 AWG strands over 0.015 in stranded.
		
			InsulationExtruded ETFE or extruded FEP or extruded PFA or extruded PTFE, TFE, See facing page for compound.
		
			conductor size
		
			18-10 AWG15 mils min average13 mils minimum at any point
		
			9-8 AWG22 avg18 min
		
			6-2 AWG30 avg27 min
		
			or Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors
		
			JacketExtruded ETFE or extruded FEP or extruded PFA or extruded PTFE, TFE - See facing page for compound
		
			dia of cable under jacket
		
			0-0.500 inches30 mils min average24 mils minimum at any point
		
			0.501-0.750 dia45 avg36 min
		
			0.751-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseA) Special use power supply cords used in high temperature equipment.
B) Special assembly of conductors, not to exceed one meter in length, for use with portable stage lighting fixtures, in accordance with Article 520 of the NEC.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4418	Issued:1992-08-04
			Revised:2019-11-08


Rating	200 deg C, 600 Vac.

Conductor	18 AWG - 8 AWG strands over 0.015 in stranded.

Insulation	Extruded ETFE or extruded FEP or extruded PFA or extruded PTFE, TFE, See facing page for compound.
	conductor size
	18-10 AWG	15 mils min average	13 mils minimum at any point
	9-8 AWG	22 avg	18 min
	6-2 AWG	30 avg	27 min
	or Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more conductors

Jacket	Extruded ETFE or extruded FEP or extruded PFA or extruded PTFE, TFE - See facing page for compound
	dia of cable under jacket
	0-0.500 inches	30 mils min average	24 mils minimum at any point
	0.501-0.750 dia	45 avg	36 min
	0.751-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	A) Special use power supply cords used in high temperature equipment. B) Special assembly of conductors, not to exceed one meter in length, for use with portable stage lighting fixtures, in accordance with Article 520 of the NEC.