UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4428
                        
                            Issued:1993-10-05
                    
                            Revised:2019-11-07
                    
                            Style
                            4428
                        
                            Multi-conductor cable with non-integral jacket
                    
			Rating75 deg C or 90 deg C, 300 Vac or 600 Vac, Cable flame.
		
			Conductor18 AWG - 2 AWG  stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Fillers, tape wrap, braid or extruded covering may be used.
		
			JacketExtruded NR - NEOPRENE
		
			dia of cable under jacket
		
			0.425 inches or less45 mils min average36 mils minimum at any point
		
			0.426-0.700 dia60 avg48 min
		
			0.701-1.500 dia80 avg64 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4428	Issued:1993-10-05
			Revised:2019-11-07


Rating	75 deg C or 90 deg C, 300 Vac or 600 Vac, Cable flame.

Conductor	18 AWG - 2 AWG stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Fillers, tape wrap, braid or extruded covering may be used.

Jacket	Extruded NR - NEOPRENE
	dia of cable under jacket
	0.425 inches or less	45 mils min average	36 mils minimum at any point
	0.426-0.700 dia	60 avg	48 min
	0.701-1.500 dia	80 avg	64 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection.