UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4430
                        
                            Issued:1994-02-07
                    
                            Revised:2012-02-22
                    
                            Style
                            4430
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Cable flame.
		
			Conductor26 AWG - 2 AWG solid or stranded round
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			JacketExtruded NBR/PVC or extruded CPE
		
			Diameter of cable under jacketAverage thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4430	Issued:1994-02-07
			Revised:2012-02-22


Rating	90 deg C, 600 Vac, Cable flame.

Conductor	26 AWG - 2 AWG solid or stranded round

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Jacket	Extruded NBR/PVC or extruded CPE
	Diameter of cable under jacket	Average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment