UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4456
                        
                            Issued:1996-10-04
                    
                            Revised:2012-07-22
                    
                            Style
                            4456
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C, 30, 125 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers and/or kevlar strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded SR, 30 mils min average, 27 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4456	Issued:1996-10-04
			Revised:2012-07-22


Rating	150 deg C, 30, 125 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers and/or kevlar strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded SR, 30 mils min average, 27 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.