UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4459
                        
                            Issued:1997-02-10
                    
                            Revised:2012-04-10
                    
                            Style
                            4459
                        
                            Laminated Flat ribbon cable
                    
			Rating105 deg C, 30 Vac, Horizontal flame.
		
			Conductor40 AWG - 12 AWG, Flat or round.
		
			InsulationPolyester film, 1.0 mil min average thickness bonded each side of conductors, with polyester adhesive 1.5 mil min average thickness. Total combined thickness 4.8 mils minimum average. 10 mils minimum edge width and 3 mils minimum distance between conductors. May have additional colored polyester layer between insulation and adhesive.
		
			AssemblyTwo to 150 conductors, laid straight or irregular parallel in one plane to form a flat cable..
		
			Shield(Optional) -  Metal faced polyester tape. Drain wire optional.
		
			Covering(Optional)
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Class 2 circuits in electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4459	Issued:1997-02-10
			Revised:2012-04-10


Rating	105 deg C, 30 Vac, Horizontal flame.

Conductor	40 AWG - 12 AWG, Flat or round.

Insulation	Polyester film, 1.0 mil min average thickness bonded each side of conductors, with polyester adhesive 1.5 mil min average thickness. Total combined thickness 4.8 mils minimum average. 10 mils minimum edge width and 3 mils minimum distance between conductors. May have additional colored polyester layer between insulation and adhesive.

Assembly	Two to 150 conductors, laid straight or irregular parallel in one plane to form a flat cable..

Shield	(Optional) - Metal faced polyester tape. Drain wire optional.

Covering	(Optional)

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Class 2 circuits in electronic equipment.