UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4461
                        
                            Issued:1998-02-25
                    
                            Revised:2012-02-22
                    
                            Style
                            4461
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150, 200 deg C, 30 Vac, 125 Vac, 150 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM procedure.
		
			AssemblyConsists of two or three singles, twisted, forming oval or round cable or parallel with optional braid and 2 or more singles cabled around the core where the lay of conductors is not specified. Manufacturer shall maintain a complete description of each assembly. May use the same or mixed AWG size.
		
			CoveringOptional - TFE tape, PTFE tape, PFA tape or FEP tape with a minimum average thickness of 2 mils.
		
			ShieldOptional.
		
			FillersOptional - Polyester with minimum average diameter of 0.020 inch.
		
			JacketExtruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Shall be extruded in two layers with a monofilament or textile braid between two layers.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Interconnection or internal wiring of electronic equipment or appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4461	Issued:1998-02-25
			Revised:2012-02-22


Rating	150, 200 deg C, 30 Vac, 125 Vac, 150 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM procedure.

Assembly	Consists of two or three singles, twisted, forming oval or round cable or parallel with optional braid and 2 or more singles cabled around the core where the lay of conductors is not specified. Manufacturer shall maintain a complete description of each assembly. May use the same or mixed AWG size.

Covering	Optional - TFE tape, PTFE tape, PFA tape or FEP tape with a minimum average thickness of 2 mils.

Shield	Optional.

Fillers	Optional - Polyester with minimum average diameter of 0.020 inch.

Jacket	Extruded SR, 30 mils minimum average thickness, 27 mils minimum thickness at any point. Shall be extruded in two layers with a monofilament or textile braid between two layers.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Interconnection or internal wiring of electronic equipment or appliances.