UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4462
                        
                            Issued:1998-03-05
                    
                            Revised:2012-03-27
                    
                            Style
                            4462
                        
                            Bonded or Laminated Extruded Flat Ribbon Cable
                    
			Rating125 deg C, 600 Vac, Horizontal flame.
		
			Conductor26 AWG - 9 AWG solid or stranded round, tinned or bare.
		
			InsulationExtruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point. See facing page.
		
			AssemblyTwo to ten conductors, laid parallel and in one plane. This forms a flat cable with a single row of conductors having a 0.5 inch maximum width web between insulated conductors. Insulation thickness along the ripped edges for each conductor shall be 30 mils minimum average thickness and 27 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4462	Issued:1998-03-05
			Revised:2012-03-27


Rating	125 deg C, 600 Vac, Horizontal flame.

Conductor	26 AWG - 9 AWG solid or stranded round, tinned or bare.

Insulation	Extruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point. See facing page.

Assembly	Two to ten conductors, laid parallel and in one plane. This forms a flat cable with a single row of conductors having a 0.5 inch maximum width web between insulated conductors. Insulation thickness along the ripped edges for each conductor shall be 30 mils minimum average thickness and 27 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment.