UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4477
                        
                            Issued:2000-04-05
                    
                            Revised:2013-01-16
                    
                            Style
                            4477
                        
                            Multi-conductor Cable using Non-integral Jacket
                    
			Rating90 - 300 deg C, Voltage Not Specified, Cable flame.
		
			Conductor30 AWG - 9 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap.
		
			ShieldOptional.
		
			JacketExtruded CP
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less45 mils36 mils
		
			0.426-0.700 inch60 mils48 mils
		
			0.701-1.500 inch78 mils62 mils
		
			1.501-2.500 inch109 mils88 mils
		
			2.501 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal Wiring or External Interconnection of Electronic Equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4477	Issued:2000-04-05
			Revised:2013-01-16


Rating	90 - 300 deg C, Voltage Not Specified, Cable flame.

Conductor	30 AWG - 9 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap.

Shield	Optional.

Jacket	Extruded CP
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	45 mils	36 mils
	0.426-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	78 mils	62 mils
	1.501-2.500 inch	109 mils	88 mils
	2.501 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal Wiring or External Interconnection of Electronic Equipment.