UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4491
                        
                            Issued:2001-09-24
                    
                            Revised:2012-08-17
                    
                            Style
                            4491
                        
                            Multi-conductor cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure having a minimum rating of 80 deg C and 30 V.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional - Extruded - PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.
		
			ShieldOptional.
		
			CoveringOptional - Extruded - PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.
		
			ShieldOptional.
		
			JacketExtruded SRB/NR.
		
			Diameter of cable under jacketMinimum averageMinimum at any point
		
			0.350 inch or less20 mils16 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils32 mils
		
			1.001-1.500 inch54 mils43 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4491	Issued:2001-09-24
			Revised:2012-08-17


Rating	80 deg C, 30 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure having a minimum rating of 80 deg C and 30 V.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded - PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.

Shield	Optional.

Covering	Optional - Extruded - PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.

Shield	Optional.

Jacket	Extruded SRB/NR.
	Diameter of cable under jacket	Minimum average	Minimum at any point
	0.350 inch or less	20 mils	16 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	32 mils
	1.001-1.500 inch	54 mils	43 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment in Class 2 circuits only.