|
Rating | 80 deg C, 90 Vac, Cable flame. |
|
Insulation | Labeled or complying with manufacturer's AWM procedure. |
|
Assembly | Consists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
Insulated conductor is built with inner covering (optional), inner shield (optional), outer covering (optional), outer shield (optional), and jacket. |
|
Shield | Optional. |
|
Covering | Optional. Extruded PVC, extruded PTFE, extruded PFA, extruded FEP, extruded ETFE or extruded SBR/NR. 5 mils minimum thickness at any point, over the assembly. |
|
Jacket | Extruded SBR/NR. |
| dia of the cable under jacket |
| 0.700 inches or less* | 30 mils min average | 24 mils minimum at any point |
| 0.701-1.000 dia | 45 avg | 36 min |
| 1.001-1.500 dia | 60 avg | 48 min |
| 1.501-2.500 dia | 80 avg | 64 min |
| 2.501-4.000 dia | 110 avg | 88 min |
| 4.001 dia and larger | 140 avg | 112 min |
| *Major diameter if cable is flat or oval. |
|
Standard | Appliance Wiring Material UL 758. |
|
Marking | General. |
|
Use | Internal wiring or external interconnection of electronic equipment. |
|