UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4493
                        
                            Issued:2001-09-24
                    
                            Revised:2011-11-28
                    
                            Style
                            4493
                        
                            Multiconductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. 

			CoveringOptional - Extruded PVC, extruded PTFE, extruded PFA, extruded FEP, extruded ETFE or extruded SBR/NR, 5 mils minimum thickness at any point, over the assembly.
		
			ShieldOptional.
		
			CoveringOptional - Extruded PVC, extruded PTFE, extruded PFA, extruded FEP, extruded ETFE or extruded SBR/NR, 5 mils minimum thickness at any point, over the assembly.
		
			ShieldOptional.
		
			JacketExtruded SRB/NR.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4493	Issued:2001-09-24
			Revised:2011-11-28


Rating	80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional - Extruded PVC, extruded PTFE, extruded PFA, extruded FEP, extruded ETFE or extruded SBR/NR, 5 mils minimum thickness at any point, over the assembly.

Shield	Optional.

Covering	Optional - Extruded PVC, extruded PTFE, extruded PFA, extruded FEP, extruded ETFE or extruded SBR/NR, 5 mils minimum thickness at any point, over the assembly.

Shield	Optional.

Jacket	Extruded SRB/NR.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.