UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4494
                        
                            Issued:2001-09-24
                    
                            Revised:2011-10-17
                    
                            Style
                            4494
                        
                            Multiple conductor using extruded non-integral jacket
                    
			Rating80 deg C, 600 Vac, Horizontal flame, Cable flame.
		
			Conductor32 AWG - 16 AWG solid or stranded round. May use same or mixed AWG size.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Insulated conductor is built with inner covering (optional), inner shield (optional), outer covering (optional), outer shield (optional), and jacket.
		
			ShieldOptional. Over and under covering
		
			CoveringOptional over conductors and inner shield- PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.
		
			JacketExtruded SRB/NR
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less*30 mils24 mils
		
			0.701-1.000 inches60 mils48 mils
		
			1.001-1.500 inches80 mils64 mils
		
			- * Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4494	Issued:2001-09-24
			Revised:2011-10-17


Rating	80 deg C, 600 Vac, Horizontal flame, Cable flame.

Conductor	32 AWG - 16 AWG solid or stranded round. May use same or mixed AWG size.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval or round cable construction. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Insulated conductor is built with inner covering (optional), inner shield (optional), outer covering (optional), outer shield (optional), and jacket.

Shield	Optional. Over and under covering

Covering	Optional over conductors and inner shield- PVC, PTFE, PFA, FEP, ETFE or SBR, 5 mil minimum at any point, over the assembly.

Jacket	Extruded SRB/NR
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less*	30 mils	24 mils
	0.701-1.000 inches	60 mils	48 mils
	1.001-1.500 inches	80 mils	64 mils
	- * Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of electronic equipment.