UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4499
                        
                            Issued:2002-03-01
                    
                            Revised:2019-11-07
                    
                            Style
                            4499
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating200 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketXL - See facing page for compound designation
		
			dia of cable under jacket
		
			0.425 inches or less*15 mils min average12 mils minimum at any point
		
			0.426-0.700 dia20 avg16 min
		
			0.701-1.500 dia30 avg24 min
		
			1.501-2.500 dia45 avg36 min
		
			2.501 dia and larger60 avg48 min
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4499	Issued:2002-03-01
			Revised:2019-11-07


Rating	200 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	XL - See facing page for compound designation
	dia of cable under jacket
	0.425 inches or less*	15 mils min average	12 mils minimum at any point
	0.426-0.700 dia	20 avg	16 min
	0.701-1.500 dia	30 avg	24 min
	1.501-2.500 dia	45 avg	36 min
	2.501 dia and larger	60 avg	48 min
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment.