UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4500
                        
                            Issued:2002-03-28
                    
                            Revised:2012-01-18
                    
                            Style
                            4500
                        
                            Multiconductor Cable with Extruded Non-integral Jacket
                    
			Rating105 deg C, 30 Vac, Horizontal flame, Cable flame.
		
			ConductorMay use same or mixed AWG size.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.
		
			JacketExtruded XLFE - crosslinked floroelastomer - See facing page for compound designation
		
			Diameter of cable under jacketMinimum averageMinimum at any point
		
			0.425 inch or less15 mils12 mils
		
			0.426-0.700 inch20 mils16 mils
		
			0.701-1.500 inch30 mils24 mils
		
			1.501-2.500 inch45 mils36 mils
		
			2.501 inch and larger60 mils48 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4500	Issued:2002-03-28
			Revised:2012-01-18


Rating	105 deg C, 30 Vac, Horizontal flame, Cable flame.

Conductor	May use same or mixed AWG size.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Jacket	Extruded XLFE - crosslinked floroelastomer - See facing page for compound designation
	Diameter of cable under jacket	Minimum average	Minimum at any point
	0.425 inch or less	15 mils	12 mils
	0.426-0.700 inch	20 mils	16 mils
	0.701-1.500 inch	30 mils	24 mils
	1.501-2.500 inch	45 mils	36 mils
	2.501 inch and larger	60 mils	48 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment.