UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4502
                        
                            Issued:2002-03-28
                    
                            Revised:2012-04-25
                    
                            Style
                            4502
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Conductorsolid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			JacketExtruded XLFE -
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.425 inch or less15 mils12 mils
		
			0.426-0.700 inch20 mils16 mils
		
			0.701-1.500 inch30 mils24 mils
		
			1.501-2.500 inch45 mils36 mils
		
			2.501 and larger60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4502	Issued:2002-03-28
			Revised:2012-04-25


Rating	150 deg C, 600 Vac, Cable flame.

Conductor	solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Jacket	Extruded XLFE -
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	15 mils	12 mils
	0.426-0.700 inch	20 mils	16 mils
	0.701-1.500 inch	30 mils	24 mils
	1.501-2.500 inch	45 mils	36 mils
	2.501 and larger	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of appliances or electronic equipment.