UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4507
                        
                            Issued:2002-07-12
                    
                            Revised:2016-07-29
                    
                            Style
                            4507
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 600 Vac, VW-1 flame, Cable Flame, Oil Resistant 60 deg C.
		
			Conductor18 AWG - 2000 kcmil, solid or stranded. Same as Type SO Cord except 40 AWG - 37 AWG strands may be used. Aramid fiber strength member may be employed as a central member in stranded conductors.
		
			InsulationExtruded EP, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo or more conductors.
		
			ShieldOptional.
		
			JacketExtruded neoprene, 60 mils minimum average thickness, 48 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External Wiring of Electronic Equipment where exposed to oil at a temperature not exceeding 60 deg C and where the final acceptability is to be determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4507	Issued:2002-07-12
			Revised:2016-07-29


Rating	90 deg C, 600 Vac, VW-1 flame, Cable Flame, Oil Resistant 60 deg C.

Conductor	18 AWG - 2000 kcmil, solid or stranded. Same as Type SO Cord except 40 AWG - 37 AWG strands may be used. Aramid fiber strength member may be employed as a central member in stranded conductors.

Insulation	Extruded EP, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two or more conductors.

Shield	Optional.

Jacket	Extruded neoprene, 60 mils minimum average thickness, 48 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External Wiring of Electronic Equipment where exposed to oil at a temperature not exceeding 60 deg C and where the final acceptability is to be determined by UL LLC.