UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4511
                        
                            Issued:2002-09-30
                    
                            Revised:2013-02-21
                    
                            Style
                            4511
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating200 deg C, 600 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional, Extruded SR, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded SR.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0-0.700 inches / 0-17.78 mm34 mils / 0.86 mm32 mils / 0.81 mm
		
			0.701-1.000 inch / 7.79-25.40 mm45 mils / 1.14 mm36 mils / 0.91 mm
		
			1.001-1.500 inch / 25.41-38.10 mm60 mils / 1.52 mm48 mils / 1.22 mm
		
			1.501-2.500 inch / 38.11-63.50 mm80 mils / 2.03 mm64 mils / 1.63 mm
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection not subject to mechanical abuse and where the acceptability of the combination is to be determined by UL.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4511	Issued:2002-09-30
			Revised:2013-02-21


Rating	200 deg C, 600 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional, Extruded SR, 6 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded SR.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0-0.700 inches / 0-17.78 mm	34 mils / 0.86 mm	32 mils / 0.81 mm
	0.701-1.000 inch / 7.79-25.40 mm	45 mils / 1.14 mm	36 mils / 0.91 mm
	1.001-1.500 inch / 25.41-38.10 mm	60 mils / 1.52 mm	48 mils / 1.22 mm
	1.501-2.500 inch / 38.11-63.50 mm	80 mils / 2.03 mm	64 mils / 1.63 mm

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection not subject to mechanical abuse and where the acceptability of the combination is to be determined by UL.