UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4516
                        
                            Issued:2003-09-12
                    
                            Revised:2012-05-02
                    
                            Style
                            4516
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			Assembly2-4 individually insulated conductors twisted together. The length of lay is not specified. Fillers may be used but are not required. Insulated conductor is built with optional inner shield, optional outer shield, and jacket.
		
			ShieldOptional - Insulated singles or conductor assembly may be provided with nylon woven tape with a conductive butyl coating.
		
			JacketExtruded Silicone Rubber, 30 mils minimum average thickness, 24 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4516	Issued:2003-09-12
			Revised:2012-05-02


Rating	150 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	2-4 individually insulated conductors twisted together. The length of lay is not specified. Fillers may be used but are not required. Insulated conductor is built with optional inner shield, optional outer shield, and jacket.

Shield	Optional - Insulated singles or conductor assembly may be provided with nylon woven tape with a conductive butyl coating.

Jacket	Extruded Silicone Rubber, 30 mils minimum average thickness, 24 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External Wiring.