UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4520
                        
                            Issued:2004-03-24
                    
                            Revised:2019-11-07
                    
                            Style
                            4520
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			CoveringOptional - 4 mil or heavier wall EPDM may be extruded over the conductor assembly or groups of conductors. Optional A 1 mil or heavier PET foil covering may be applied over the conductor assembly.
		
			JacketExtruded CPE
		
			dia of cable under jacket
		
			0.000-0.750 inches55 mils min average44 mils minimum at any point
		
			0.751-1.000 dia110 avg88 min
		
			1.001-1.250 dia125 avg100 min
		
			1.251-1.500 dia140 avg112 min
		
			1.501-1.750 dia160 avg128 min
		
			1.751-2.000 dia180 avg144 min
		
			2.001-2.250 dia200 avg160 min
		
			2.251-2.500 dia220 avg176 min
		
			2.501-2.750 dia240 avg192 min
		
			2.751-3.000 dia260 avg208 min
		
			3.001-3.250 dia280 avg224 min
		
			3.251-3.500 dia295 avg236 min
		
			3.501-3.950 dia310 avg248 min
		
			3.951-4.450 dia330 avg264 min
		
			4.451-5.000 dia345 avg276 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4520	Issued:2004-03-24
			Revised:2019-11-07


Rating	90 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Covering	Optional - 4 mil or heavier wall EPDM may be extruded over the conductor assembly or groups of conductors. Optional A 1 mil or heavier PET foil covering may be applied over the conductor assembly.

Jacket	Extruded CPE
	dia of cable under jacket
	0.000-0.750 inches	55 mils min average	44 mils minimum at any point
	0.751-1.000 dia	110 avg	88 min
	1.001-1.250 dia	125 avg	100 min
	1.251-1.500 dia	140 avg	112 min
	1.501-1.750 dia	160 avg	128 min
	1.751-2.000 dia	180 avg	144 min
	2.001-2.250 dia	200 avg	160 min
	2.251-2.500 dia	220 avg	176 min
	2.501-2.750 dia	240 avg	192 min
	2.751-3.000 dia	260 avg	208 min
	3.001-3.250 dia	280 avg	224 min
	3.251-3.500 dia	295 avg	236 min
	3.501-3.950 dia	310 avg	248 min
	3.951-4.450 dia	330 avg	264 min
	4.451-5.000 dia	345 avg	276 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.