UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4535
                        
                            Issued:2005-06-29
                    
                            Revised:2012-11-26
                    
                            Style
                            4535
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating150 deg C, 600 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded SR, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded SR.
		
			Diameter of assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0-0.700 in.30 mils24 mils
		
			0.701-1.000 in.45 mils36 mils
		
			1.001-1.500 in.60 mils48 mils
		
			1.501-2.500 in.80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection not subject to mechanical abuse.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4535	Issued:2005-06-29
			Revised:2012-11-26


Rating	150 deg C, 600 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded SR, 6 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded SR.
	Diameter of assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0-0.700 in.	30 mils	24 mils
	0.701-1.000 in.	45 mils	36 mils
	1.001-1.500 in.	60 mils	48 mils
	1.501-2.500 in.	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection not subject to mechanical abuse.