UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4539
                        
                            Issued:2005-12-16
                    
                            Revised:2012-12-12
                    
                            Style
                            4539
                        
                            Flat ribbon cable
                    
			Rating105 deg C, 300 Vac, Horizontal flame.
		
			Conductor36 AWG - 18 AWG, solid or stranded.
		
			InsulationExtruded XLPE, 8 mils min average, 7 mils minimum at any point. If rippable construction, measurements of insulation thickness shall be made after ripping.
		
			AssemblyTwo or more insulated conductors are laid parallel and heat bonded together, or insulation is extruded over multi-conductors laid parallel simultaneously with webs between conductors. Sections of the cable may be split into singles or groups of conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4539	Issued:2005-12-16
			Revised:2012-12-12


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	36 AWG - 18 AWG, solid or stranded.

Insulation	Extruded XLPE, 8 mils min average, 7 mils minimum at any point. If rippable construction, measurements of insulation thickness shall be made after ripping.

Assembly	Two or more insulated conductors are laid parallel and heat bonded together, or insulation is extruded over multi-conductors laid parallel simultaneously with webs between conductors. Sections of the cable may be split into singles or groups of conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.