UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4545
                        
                            Issued:2008-03-17
                    
                            Revised:2012-04-13
                    
                            Style
                            4545
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating125 deg C, 1000 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together.  All conductors in any groups twisted together.  If more than one group isused, groups shall also be twisted together.  The length of lay of the twisted conductors or groups is not specified. A barrier, layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap.  Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			JacketExtruded XLPE.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less30 mils24 mils
		
			0.701-1.000 dia45 miks36 mils
		
			1.001-1.500 dia60 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4545	Issued:2008-03-17
			Revised:2012-04-13


Rating	125 deg C, 1000 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any groups twisted together. If more than one group isused, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier, layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Jacket	Extruded XLPE.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	30 mils	24 mils
	0.701-1.000 dia	45 miks	36 mils
	1.001-1.500 dia	60 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.