UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4547
                        
                            Issued:2008-07-03
                    
                            Revised:2011-10-17
                    
                            Style
                            4547
                        
                            Multiple conductor cable using extruded non-integral jacket
                    
			Rating90 deg C, 1000 Vac, Cable flame.
		
			Conductor18 AWG - 4/0 AWG min. solid or stranded round.
		
			InsulationExtruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable.  Conductors in any group twisted together.  If more than one group is used, groups shall also be twisted together.  The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Fillers, tape wrap, braid or extruded covering may be used.

			ShieldOptional.
		
			BraidOptional.
		
			JacketExtruded CP.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.000-0.700 inches30 mils24 mils
		
			0.701-1.000 inches45 mils36 mils
		
			1.001-1.500 inches60 mils48 mils
		
			1.501-2.500 inches80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4547	Issued:2008-07-03
			Revised:2011-10-17


Rating	90 deg C, 1000 Vac, Cable flame.

Conductor	18 AWG - 4/0 AWG min. solid or stranded round.

Insulation	Extruded XLPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two or more individually insulated conductors or groups of insulated conductors laid parallel or cabled together to form a flat, oval or round cable. Conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. The use of a barrier layer and/or fillers is optional. Fillers, tape wrap, braid or extruded covering may be used.

Shield	Optional.

Braid	Optional.

Jacket	Extruded CP.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.000-0.700 inches	30 mils	24 mils
	0.701-1.000 inches	45 mils	36 mils
	1.001-1.500 inches	60 mils	48 mils
	1.501-2.500 inches	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.