UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4550
                        
                            Issued:2008-10-20
                    
                            Revised:2011-08-02
                    
                            Style
                            4550
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			Conductor32 AWG - 4 AWG, solid or stranded.
		
			InsulationExtruded thermoset CPE, 19 mils minimum average thickness, 17 mils minimum thickness at any point.
		
			AssemblyTwo or more insulated conductors.  Fillers optional.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded thermoset CPE
		
			Dia. of assembly under jacket@mils min averagemils min at any point
		
			0.700 inch or less3024
		
			0.701-1.000 inch4536
		
			1.001-1.500 inches6048
		
			1.501-2.500 inches8064
		
			@Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket,  and W is the width of the assembly under jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4550	Issued:2008-10-20
			Revised:2011-08-02


Rating	80 deg C, 300 Vac, Cable flame.

Conductor	32 AWG - 4 AWG, solid or stranded.

Insulation	Extruded thermoset CPE, 19 mils minimum average thickness, 17 mils minimum thickness at any point.

Assembly	Two or more insulated conductors. Fillers optional.

Shield	Optional.

Covering	Optional.

Jacket	Extruded thermoset CPE
	Dia. of assembly under jacket@	mils min average	mils min at any point
	0.700 inch or less	30	24
	0.701-1.000 inch	45	36
	1.001-1.500 inches	60	48
	1.501-2.500 inches	80	64
	@Equivalent diameter of flat assembly = 1.1284 x (TW)0.5 where T is the thickness of the assembly under jacket, and W is the width of the assembly under jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring.