UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4574
                        
                            Issued:2010-10-05
                    
                            Revised:2012-03-30
                    
                            Style
                            4574
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 300 Vac, No Flame Rating.
		
			Conductor50 AWG - 10 AWG min. solid or stranded round.
		
			InsulationExtruded TPES, 9 mils min average, 8 mils min at any point.  See Facing Page for Compound.
		
			AssemblyTwo insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together.  All conductors in any group twisted together.   Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional - Metal Tape or Metal Braid.
		
			JacketExtruded XLPE, 13 mils min average, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 4	Page 4574	Issued:2010-10-05
			Revised:2012-03-30


Rating	90 deg C, 300 Vac, No Flame Rating.

Conductor	50 AWG - 10 AWG min. solid or stranded round.

Insulation	Extruded TPES, 9 mils min average, 8 mils min at any point. See Facing Page for Compound.

Assembly	Two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional - Metal Tape or Metal Braid.

Jacket	Extruded XLPE, 13 mils min average, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire.