UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4577
                        
                            Issued:2010-11-12
                    
                            Revised:2012-01-18
                    
                            Style
                            4577
                        
                            Muticonductor Cable with Extruded Non-integral Jacket
                    
			Rating105 deg C, 300 Vac,  Horizontal flame.
		
			Conductor32 AWG - 10 AWG min. solid or stranded round.
		
			InsulationXLPE - CHEM Or IRR, 15 mils min average thickness, 13 mils minimum at any point thickness.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketXLPE - CHEM Or IRR
		
			Dia of Cable under jacketMin average thicknessMinimum at any point thickness
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4577	Issued:2010-11-12
			Revised:2012-01-18


Rating	105 deg C, 300 Vac, Horizontal flame.

Conductor	32 AWG - 10 AWG min. solid or stranded round.

Insulation	XLPE - CHEM Or IRR, 15 mils min average thickness, 13 mils minimum at any point thickness.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	XLPE - CHEM Or IRR
	Dia of Cable under jacket	Min average thickness	Minimum at any point thickness
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring