UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4580
                        
                            Issued:2011-01-14
                    
                            Revised:2011-07-28
                    
                            Style
                            4580
                        
                            Parallel Cable with Extruded Integral Insulation
                    
			Rating105 deg C, 30 Vac, Horizontal flame
		
			Conductor40 AWG - 10 AWG min, solid or stranded
		
			InsulationExtruded XLPE, 4 mils minimum average thickness, 3 mils minimum thickness at any point
		
			Assembly2 to 150 insulated conductors are co-extruded in such a fashion to form a rippable flat ribbon-type cable. All conductors in any one cable may be of the same AWG size or mixed AWG sizes. Thickness before and after ripping shall be 4 mils min average thickness, 3 mils min thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral
		
			UseInternal wiring of appliances where not subjected to movement or mechanical damage.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4580	Issued:2011-01-14
			Revised:2011-07-28


Rating	105 deg C, 30 Vac, Horizontal flame

Conductor	40 AWG - 10 AWG min, solid or stranded

Insulation	Extruded XLPE, 4 mils minimum average thickness, 3 mils minimum thickness at any point

Assembly	2 to 150 insulated conductors are co-extruded in such a fashion to form a rippable flat ribbon-type cable. All conductors in any one cable may be of the same AWG size or mixed AWG sizes. Thickness before and after ripping shall be 4 mils min average thickness, 3 mils min thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General

Use	Internal wiring of appliances where not subjected to movement or mechanical damage.