UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4617
                        
                            Issued:2017-03-06
                    
                            Revised:New
                    
                            Style
                            4617
                        
                            Parallel Cable with Extruded Insulation
                    
			Rating150 deg C, 300 Vac, Horizontal flame.
		
			Conductor40 AWG - 10 AWG, solid or stranded round, tinned or bare copper; or Litz Cable Magnet Wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 150 deg C.  AWG size to be determined by the DC Resistance Test per UL 1581.
		
			InsulationExtruded Silicone Rubber, 15 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyTwo insulated conductors laid parallel, may have an interconnecting web.  Minimum thickness at any point after separation shall be the same as above.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring where totally enclosed.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	150 deg C, 300 Vac, Horizontal flame.

Conductor	40 AWG - 10 AWG, solid or stranded round, tinned or bare copper; or Litz Cable Magnet Wire. A magnet wire conductor shall consist of a single strand Recognized Component - Magnet Wire (OBMW2) or an assembly of these individually enameled wires, which may be assembled or twisted together with an overall covering of film fiber, tape, or extruded compound to form a Litz wire. The minimum rating shall be 150 deg C. AWG size to be determined by the DC Resistance Test per UL 1581.

Insulation	Extruded Silicone Rubber, 15 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Two insulated conductors laid parallel, may have an interconnecting web. Minimum thickness at any point after separation shall be the same as above.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring where totally enclosed.