UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4619
                        
                            Issued:2017-11-21
                    
                            Revised:2017-11-22
                    
                            Style
                            4619
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating150 deg C, 600 Vac, Cable Flame
		
			InsulationLabeled or complying Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors. A drain wire may be employed. Uncoated copper or copper alloy drain wire is not acceptable to be in contact with an aluminum-faced tape.
		
			JacketExtruded XLPO, 40 mils minimum average thickness, 32 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4619	Issued:2017-11-21
			Revised:2017-11-22


Rating	150 deg C, 600 Vac, Cable Flame

Insulation	Labeled or complying Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and is applied immediately over the twisted assembly of individual conductors or groups of conductors. A drain wire may be employed. Uncoated copper or copper alloy drain wire is not acceptable to be in contact with an aluminum-faced tape.

Jacket	Extruded XLPO, 40 mils minimum average thickness, 32 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.