UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4620
                        
                            Issued:2017-12-21
                    
                            Revised:New
                    
                            Style
                            4620
                        
                            Laminated Flat Cable
                    
			Rating125 deg C, 60 Vac, Horizontal Flame.
		
			Conductor36 AWG - 18 AWG , bare, tinned or plated, round or flat. Min thickness of 2.0 mils, max thickness of 6.0 mils. Min width of 10 mils, max width of 150 mils.
		
			InsulationPolyimide, 0.8 mils minimum average thickness.
		
			AssemblyTwo to sixty conductors. On each side of conductors, a 0.8 mil min wall of polyimide film with a 0.1 mil of polyester adhesive. Insulation width on outside edges of conductors not less than 10 mils and not less than 20 mils width of insulation between adjacent conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	125 deg C, 60 Vac, Horizontal Flame.

Conductor	36 AWG - 18 AWG , bare, tinned or plated, round or flat. Min thickness of 2.0 mils, max thickness of 6.0 mils. Min width of 10 mils, max width of 150 mils.

Insulation	Polyimide, 0.8 mils minimum average thickness.

Assembly	Two to sixty conductors. On each side of conductors, a 0.8 mil min wall of polyimide film with a 0.1 mil of polyester adhesive. Insulation width on outside edges of conductors not less than 10 mils and not less than 20 mils width of insulation between adjacent conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.