UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4629
                        
                            Issued:2018-11-01
                    
                            Revised:New
                    
                            Style
                            4629
                        
                            Multiple-conductors cable using non-integral jacket.
                    
			Rating105 deg C, 15000 Vac, Horizontal flame.
		
			Conductor26 AWG - 14 AWG, solid or stranded.
		
			InsulationExtruded XLPE, 94 mils minimum average thickness, 85 mils minimum thickness at any point.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			Inner JacketExtruded PVC, 39 mils minimum average thickness, 31 mils minimum thickness at any point, extruded over each insulated conductor.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			1.500 or less7056
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	105 deg C, 15000 Vac, Horizontal flame.

Conductor	26 AWG - 14 AWG, solid or stranded.

Insulation	Extruded XLPE, 94 mils minimum average thickness, 85 mils minimum thickness at any point.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Inner Jacket	Extruded PVC, 39 mils minimum average thickness, 31 mils minimum thickness at any point, extruded over each insulated conductor.

Shield	Optional.

Covering	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	1.500 or less	70	56
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.