UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4633
                        
                            Issued:2019-02-14
                    
                            Revised:New
                    
                            Style
                            4633
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating150 deg C, 30 or 125 Vac, Horizontal flame.
		
			InsulationLabeled or complying with Manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers and/or kevlar strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional - Metal braid, metal tape or an aluminum/polyester tape.
		
			JacketExtruded SR, 30 mils min average thickness, 27 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial - Interconnecting cable for medical instruments - where the acceptability of the combination is to be determined by Underwriters Laboratories.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	150 deg C, 30 or 125 Vac, Horizontal flame.

Insulation	Labeled or complying with Manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers and/or kevlar strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional - Metal braid, metal tape or an aluminum/polyester tape.

Jacket	Extruded SR, 30 mils min average thickness, 27 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special - Interconnecting cable for medical instruments - where the acceptability of the combination is to be determined by Underwriters Laboratories.