UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4637
                        
                            Issued:2019-09-23
                    
                            Revised:2019-10-07
                    
                            Style
                            4637
                        
                            Multiple-conductor cable using extruded non-integral jacket
                    
			Rating150 deg C,no voltage specified, Cable flame.
		
			Conductor40 AWG Minimum, solid or stranded.
		
			InsulationExtruded PFA, 15 mils min. avg, 13 mils min. at any point, or labeled or complying with Manufacturer's AWM procedure having a minimum rating of 150C.
		
			AssemblyTwo or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of conductors is not specified. A barrier layer and/or fillers are optional. May Use same or mixed AWG size.
		
			Shieldoptional
		
			Coveringoptional
		
			JacketExtruded SR
		
			Diameter of cable under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.425 or less3633
		
			0.426-0.7004536
		
			0.701-1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal or Internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 4	Page 4637	Issued:2019-09-23
			Revised:2019-10-07


Rating	150 deg C,no voltage specified, Cable flame.

Conductor	40 AWG Minimum, solid or stranded.

Insulation	Extruded PFA, 15 mils min. avg, 13 mils min. at any point, or labeled or complying with Manufacturer's AWM procedure having a minimum rating of 150C.

Assembly	Two or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of conductors is not specified. A barrier layer and/or fillers are optional. May Use same or mixed AWG size.

Shield	optional

Covering	optional

Jacket	Extruded SR
	Diameter of cable under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.425 or less	36	33
	0.426-0.700	45	36
	0.701-1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External or Internal Wiring.