UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4654
                        
                            Issued:2023-03-27
                    
                            Revised:New
                    
                            Style
                            4654
                        
                            Multiple-conductors cable using non-integral jacket
                    
			Rating150 deg C, 600 Vac, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers are optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded XLFE (Crosslinked Fluoroelastomer). See Facing Page for compound designation.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			2.500 inch or less30 mils24 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	150 deg C, 600 Vac, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers are optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Jacket	Extruded XLFE (Crosslinked Fluoroelastomer). See Facing Page for compound designation.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	2.500 inch or less	30 mils	24 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.