UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            4
                        
                            Page
                            4658
                        
                            Issued:2023-06-26
                    
                            Revised:New
                    
                            Style
                            4658
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 300 Vac, Cable Flame
		
			Conductor22 AWG - 12 AWG, Stranded Metal Coated Copper
		
			InsulationExtruded PP - 10 mils minimum average thickness, 9 mils minimum at any point or Extruded PVC - 32 mils minimum average thickness, 29 mils minimum average thickness.
		
			AssemblyOne or more pairs of PP insulation with barrier, metal coated drain wire, and AL/Polyester Foil Shield. One or more PVC insulated conductors. PP and or Kevlar Fillers and PP Binder. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			JacketExtruded CPE
		
			diameter of round assembly under jacket in inchesaverage thickness in milsminimum thickness in mils
		
			0-1.5006048
		
			1.5001-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, 300 Vac, Cable Flame

Conductor	22 AWG - 12 AWG, Stranded Metal Coated Copper

Insulation	Extruded PP - 10 mils minimum average thickness, 9 mils minimum at any point or Extruded PVC - 32 mils minimum average thickness, 29 mils minimum average thickness.

Assembly	One or more pairs of PP insulation with barrier, metal coated drain wire, and AL/Polyester Foil Shield. One or more PVC insulated conductors. PP and or Kevlar Fillers and PP Binder. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly of individual conductors or groups of conductors. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Jacket	Extruded CPE
	diameter of round assembly under jacket in inches	average thickness in mils	minimum thickness in mils
	0-1.500	60	48
	1.5001-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.