UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            5
                        
                            Page
                            5058
                        
                            Issued:1963-06-04
                    
                            Revised:2011-12-02
                    
                            Style
                            5058
                        
                            Single conductor with other-than-extruded insulation
                    
			Rating105 deg C, 600 Vac.
		
			Conductor20 AWG - 8 AWG consisting of Nos. 30-38 AWG stranded. Length of lay per requirements for Type ST Cord.
		
			InsulationPTFE tape, 2.0 mils thickness applied half-lap directly beneath a PETP tape, 0.5 mils thickness applied half lap, the tapes to lie between inner and outer closely woven PETP fiber braids.
		
			AssemblyInsulated single conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseWire within hermetic motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 5	Page 5058	Issued:1963-06-04
			Revised:2011-12-02


Rating	105 deg C, 600 Vac.

Conductor	20 AWG - 8 AWG consisting of Nos. 30-38 AWG stranded. Length of lay per requirements for Type ST Cord.

Insulation	PTFE tape, 2.0 mils thickness applied half-lap directly beneath a PETP tape, 0.5 mils thickness applied half lap, the tapes to lie between inner and outer closely woven PETP fiber braids.

Assembly	Insulated single conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Wire within hermetic motors where the acceptability of the combination is to be determined by Underwriters Laboratories Inc.